Microduct Endstop

Microduct Endstop


A tube end connector is used to seal a open microduct and prevent dirt or water ingress.

DatasheetInquiry

Characteristics

Material (typical): Body:    PC, impact resistant                     

                          Collect:  POM, stainless steel teeth

                          O-rings:  Nitrile rubber

 

Performance

1. Blowing Pressure:  Between temperatures of -10 and +60, all connectors size can be used for blowing operations at pressures up to 16bar.

2. Burst Pressure:      26bar

3. Gas Tightness:     Leakage at 16 bar gas pressure: 1ml/minute approx

                               Leakage at 0.7bar gas pressure: 0.1ml/minute approx

4. Water ingress:     The connectors shall seal against a 6m head of water.

5. Insertion force:     50N max (5kg)

6. Retention force:       25N min (3mm m/d)      55N min (5mm m/d)     125N min (8mm m/d) 

(collect not held in)       125N min (10mm m/d)   155N min (14mm microduct)


Specification

Code

Description

GMEC-3

3mm end connector

GMEC-4

4mm end connector

GMEC -5

5mm end connector

GMEC -6

6mm end connector

GMEC -7

7mm end connector

GMEC -8

8mm end connector

GMEC -10

10mm end connector

GMEC -12

12mm end connector

GMEC -12.7

12.7mm end connector

GMEC -14

14mm end connector

GMEC -16

16mm end connector

GMEC -18

18mm end connector